|
Dining Room Furniture
Sideboard for the Dining-Room Set
-
Dining room furniture plan: The sideboard is a piece designed to go with the
armchair and side chair with similar paneling design. Like these chairs the
sideboard should be made of hard wood and should be similarly finished. The
drawer pulls, if not made of wood, should be of such metal and design as to
harmonize with the mission style. Wrought-iron effects in plain outlines are
appropriate.
Drawer sides, bottoms and backs may be made of some soft wood, such as yellow
poplar. The small top drawer may be lined with ooze leather for holding silverware.
Obtain the following stock for this dining room furniture plan:
• 2 posts, 2 by 2 by 50 in., S-4-S.
• 2 posts, 2 by 2 by 39 in., S-4-S.
• 1 top, 1 by 23 by 58 in., S-2-S.
• 2 plate rails, 1/2 by 2 by 58 in., S-4-S.
• 1 plate rail, 1/2 by 1-1/2 by 58 in., S-4-S.
• 2 rails, 7/8 by 2 by 21 in., S-4-S.
• 2 rails, 7/8 by 2-1/2 by 21 in., S-4-S.
• 2 rails, 7/8 by 3 by 21 in., S-4-S.
• 4 slats, 3/8 by 1-1/2 by 10-1/2 in., S-4-S.
• 2 slats, 3/8 by 3-1/2 by 10-1/2 in., S-4-S.
• 2 panels, 3/8 by 18-3/4 by 10 in., S-2-S.
• 1 back rail, 7/8 by 2 by 54 in., S-4-S.
• 1 back rail, 7/8 by 3-1/8 by 54 in., S-4-S.
• 1 back rail, 7/8 by 3 by 54 in., S-4-S.
• 2 back stiles, 7/8 by 1-3/4 by 11 in., S-4-S.
• 2 back stiles, 7/8 by 2-1/2 by 11 in., S-4-S.
• 1 back panel, 3/8 by 10 by 24-1/2 in., S-2-S.
• 1 back panel, 3/8 by 11-1/2 by 53 in., S-2-S.
• 2 back panels, 3/8 by 11 by 11 in., S-2-S.
• 1 drawer front, 3/4 by 3 by 24-1/2 in., S-4-S.
• 2 drawer fronts, 3/4 by 4 by 24-1/2 in., S-4-S.
• 2 drawer fronts, 3/4 by 6 by 52-1/2 in., S-4-S.
• 2 drawer ends, 1/2 by 3 by 20 in., S-4-S, poplar.
• 4 drawer ends, 1/2 by 4 by 20 in., S-4-S, poplar.
• 4 drawer ends, 5/8 by 6 by 20 in., S-4-S, poplar.
• 3 drawer backs, 3/8 by 4 by 24 in., S-2-S, poplar.
• 2 drawer backs, 3/8 by 6 by 52 in., S-2-S, poplar.
• 3 drawer bottoms, 3/8 by 20 by 24 in., S-2-S, poplar.
• 2 drawer bottoms, 3/8 by 20 by 52 in., S-2-S, poplar.
• 2 drawer supports, 3/4 by 2-1/2 by 24-1/2 in., S-4-S.
• 4 drawer supports, 3/4 by 2-1/2 by 54 in., S-4-S.
• 10 drawer slides, 3/4 by 2 by 22 in., S-4-S.
• 2 middle verticals, 3/4 by 22 by 13 in., S-2-S.
• Drawer guides can be made from scrap stock.
A detailed description of this dining room furniture plan is hardly necessary
for such a piece of work as this. Anyone capable of building it, will know the
order of the different operations that are required in its construction.
It may be said that the two back panels at either side of the small drawers
may be filled with beveled plate glass instead of wood if one so choose of this
dining room furniture plan.
More Free Woodworking Projects
|
|
